My Cart

Close

Ortal

Ortal Power Vent System

$2,790.00

Power Vent Options

Ortal offers two power vent options to give you even greater design freedom: Inline-90 Power Vent System and Flush Horizontal Termination Power Vent System. 

Inline-90 Power Vent System

Allows for both horizontal and vertical termination.

Accommodates vent runs up to 27m in length (varies per model).

Allows up to six 90-degree offsets (elbows) for a total of 540 degrees.

Smaller pipe size (5-inch diameter).

Allows up to 1.8m of downhill run.

No additional power required.

Power vent fan is incorporated into the run as one of the 90-degree offsets.

Power vent fan must be installed at least 2.7m of vent pipe and up to 14m away from the fireplace.

An access panel for the power vent fan is required for servicing.

 

Flush Horizontal Termination Power Vent System (End-line)

Allows for horizontal termination only.

Accommodates vent runs up to 20m in length.

Allows up to six 90-degree offsets (elbows) for a total of 540 degrees.

Smaller pipe size (5-inch diameter).

Allows up to 1.8m of downhill run.

No additional power required.

Power vent fan acts as the termination cap and sits flush to the outside wall.

Power vent fan must be installed a minimum of 2.7m of vent pipe away from the fireplace.

An access panel is not required for servicing.